Tachometer 60mm with indicator lights K=1.4 black, white lighting Neue Kollektion

Beautifully designed, high-quality analog speedometer in a black metal case.
Minimalistic replacement for the original speedometer, TÜV-compliant. The speedometer comes ready to install, a complete
Mounting kit is included in delivery.
Excellent for cafe racer or chopper conversion.

The scale goes up to 220 km/h and is illuminated in white.

Mass:
– Instrument installation diameter: approx. 60mm
– Outer diameter at the chrome edge: approx. 66.5mm
– Total length (without cable): approx. 53mm
– Connection for the speedometer cable M12 x 1 (fits almost all models!)
– Square connection for the shaft: approx. 2.5mm x 2.5mm (standard size)
– The speedometer works mechanically
– K-value of 1.4 and therefore fits almost all motorcycles with a daily odometer
– 4 indicator lights (high beam, neutral, oil pressure, indicators)

Cable assignment:
– orange: speedometer lighting
– red: oil indicator light
– red-black: mass
– blue: high beam
– blue-black: mass
– yellow: indicator
– yellow-black: mass
– green-black: ground-neutral
– green: neutral gear
– black: mass

If you are not sure what gear ratio your motorcycle has, you can also
find out if this instrument will display the speed correctly.

The K value can be determined as follows
– Measure the circumference of the wheel (using a tape measure or by rolling)
– Unscrew the shaft from the speedometer. Make 10 turns with the wheel and count the turns
of the now visible square
– Calculation: K=10 x number of revolutions of the square divided by the wheel circumference in cm
– Round the result to one decimal place (there are actually only speedometers with the K values 1.0 and 1.4)

GB: Small speedometer / speedo
FR: Petit tachymètre / compteur