Rear frame, Yamaha Virago XV920 / TR1 / XV 750 / XV100/VX 1000 Garantierte Lieferung

Complete rear frame for the Yamaha Virago XV 750, XV920 / TR1 & XV100/VX 1000
Monoshock.

This rear frame can be done in no time without any flexing or welding work
time can be exchanged for the original.
The original shock absorber can also be adopted one-to-one.

There is no report on this, but the entry is according to
Experience has shown that consultation with the TÜV inspector is not a problem,
because it is a screwed attachment. Otherwise best
change the TÜV and/or the inspector 🙂

Dimensions
– Total length: approx. 520mm
– Maximum width: approx. 235mm
– Front width: approx. 160mm
– Width at the back: approx. 210mm

Compatible with following models
– Yamaha Virago XV 750 Monoshock
– Yamaha Virago XV920 / TR1 Monoshock

The following benches fit without
Modification to this rear frame:
– SB-T1
– SB-T2
– SB-T3
– SB-T4
– SB-T5
– SB-T6
– SB-T7
– SB-T8
– SB-T9
– SB-T10
– SB-T15
– SB-Z6B
– SB-T6D
– SB-ZT6

To assemble the following benches, you must use the seats intended for this purpose
four holes in the frame may need to be widened slightly
(e.g. with a round file):
– SB-P1
– SB-P2
– SB-P3
– SB-P4
– SB-P5
– SB-P6
– SB-P7
– SB-P8
– SB-P9
– SB-P10
– SB-P11
– SB-P12
– SB-P15

Free shipping within Germany!