Angebot!
REAR FRAME for all Twinshock BMW R models with 2-valve engine: / 5/6/7, R45-R100 Neue Kollektion

REAR FRAME for all Twinshock BMW R models with 2-valve engine: / 5/6/7, R45-R100 Neue Kollektion

Ursprünglicher Preis war: 242,86 €Aktueller Preis ist: 97,14 €.

Sichere Zahlung Karte, PayPal und geschützter Checkout
Kostenloser Versand ab 48,00 € Schnelle Lieferung in ganz Deutschland
Schneller Support Hilfe bei Bestellungen und Versand
Artikelnummer: SK0003851-DE20260317-163550 Kategorie: Schlagwort:

Complete rear frame for the BMW R series, stereo strut models (2 struts).

This rear frame can be exchanged for the original in a very short time without flexing or welding work.
The original struts can also be taken over one-to-one.
In this way, the look of the BMW can be changed significantly in a short time.

Dimensions:
 – Length: approx. 535mm
– Width (measured outside): approx. 240mm
– Width inside at the front mount: 207mm
– Ø tubes: 25mm
– Angle of the stern: approx. 25 degrees

An expert opinion is not available, but the entry is after consultation with a motorcyclist, expert
Experience has shown that TÜV inspectors are not a problem . If so: please ask another examiner.

The frame is powder-coated in black silk matt.

Suitable for the following BMW models:
 – R45
– R65
– R75
– R80
– R100
– Twinshock / stereo shock absorber models

Under the item number HR-ADM you will find a splash guard suitable for this rear frame.

You will find suitable accessories for equipping the base plate with a bench under the following article numbers:

Foam
20 mm SB-S2
30 mm SB-S3
50 mm SB-S5
80 mm SB-S8
Bench base plate
610 x 330 x 10 mm SB-RET
450 x 250 x 8 mm SB-UPB
leatherette
red KL-RT
earth brown KL-TER
brown KL-BR
vintage brown KL-VI
vintage beige KL-VHB
White KL-WS
silver / gray KL-SI
black, slightly grained (large) KL-1S
black, grained KL-BB
black, grained (large) KL-B1S
Foam rubber
520 x 250 x 15 mm MOSS

Tips for assembling a sporty hump seat can be found under Tips in the Kickstartershop .

Under the item number „KA-BAU“ you will find a suitable wiring harness for the rear electrics (for taillights & indicators).
This saves the removal of the original wiring harness when customizing the motorcycle. The original wiring harness can
thus remain in the original rear frame. If a trip is pending, the original frame can be restored in a few simple steps
can be used. This means, for example, that the advantages of the suitcase set and those of the large 2-man bench can continue to be used for tours
be used.

Under the item number „KF-HL“ you will find an aluminum fender , which is the unsightly original plastic fender of all
BMW R models replaced.

You can also find rear frames for the other BMW models in the Kickstartershop .

Free shipping within Germany!

GB: SUBFRAME for BMW R-model, twinshock

Ähnliche Produkte