Kostenfreie Lieferung INTAKE FUNNEL with strainer, 53-57mm

Short funnel/sieve, designed for sports use, but more for show purposes.
The metal parts on the end cap and base are high-quality chrome-plated.

ATTENTION: Due to the higher air flow, the carburetor must be re-adjusted,
Otherwise, a mixture that is too lean can overheat the engine and cause damage.
Experience shows that 4-stroke engines are equipped with jets that are approximately 25-30 numbers larger
(e.g. from size 100 to 125 to 130); move the jet needle one ring higher.

For 2-stroke engines, the number of jets must be even higher.
These are guidelines, but the correct candle pattern is crucial.
This should always be „fawn“ immediately after full load operation .

Usually only registrable for older models.
(before approx. 1983, please check with the TÜV).

Dimensions
– Total length of the sieve: approx. 52mm (including rubber connector)
– Maximum diameter at the widest point (chrome-plated ring): 75mm
– Rubber flange inner diameter: approx. 54mm

Suitable for carburetor intake manifolds with an outer diameter of approx. 53-57mm.

Therefore suitable for the following motorcycles:

HONDA
– CB 550 / CB550 SC
– CB 750 / CB750 K / F
– CB 900 / CB900 up to 82
– CB1000 / CB1000
– CB 1100 / CB1100 F
– CBX1050

KAWASAKI
– GPz 750 / Gpz750
– GPz900
– KZ 750 / KZ750 LTD
– KZ 1000 / KZ1000 year 81-82
– KZ 1100 / KZ1100 year 81-82
– KZ 1300 / KZ1300 year 81-82

SUZUKI
– GS 650 / GS650 year 80-85
– GS 700 / GS700 year 80-85
– GS 750 / GS750 year 80-85
– GS 850 / GS850 year 80-85
– GS 1000 / GS1000 year 80-85
– GS 1150 / GS1150 year 80-85
(INCL. GSX / KATANA)

YAMAHA
– XJ600 / XJ500
– XJ600 / XJ600
– XJ650 / XJ650
– XJ600 / XJ650
– XJ600 / XJ650
– FJ600 / FJ600
– FJ1100 / FJ1100
– XS 1100 / XS1100 year 80-81
– FJ 1200 / FJ1200 Bj. 93

BMW
– R100

Delivery includes solid, chrome-plated mounting clamp.