Cafe racer, scrambler, bench seat, universal, pillion-suitable, Brown, black seams Versand Am Gleichen Tag

Beautiful, the highest seat for the scrambler conversion.
This bench can be with a little craftsmanship
attach to many different machines.

The base is deep-drawn thermoplastic.
Therefore not so stiff as for example Fiberglass.
This man gives himself experience shows that discussions with the
Auditor on strength and fracture behavior. However, we recommend
Mounted on a stable base. For mounting the seat
are 2 threaded bushings in the substructure.
In addition, this bench properly saves weight:
Weighs only about 1.2 kilograms!

Find useful tips and tricks for installing the seat
At www.kickstarter.de under ‚Tips‘

Color
-Imitation leather: dark brown/vintage
-Seams: black

Mass
-(A) total length: approx. 600mm
-Broad front (D): approx. 190mm (measured on the inside)
-Length of the seat (C): approx. 600 mm
-maximum width rear (B): approx. 240mm (measured on the inside)
– We send you gladly on request other dimensions.

This bench seat rises back by about 20 °.
A bench without these Knick, see the order number SB-G11.

The bench is supplied on request with an opinion of the material.

IMPORTANT NOTE
Please take note that we retorted, not suitable goods only
full refund without damage .
Therefore make sure the car seat when you place on the frame,
not to damage (E.g. by sharp parts of the frame or by sitting on
without proper installation). Thank you very much!